close
Filter By
Tedders / Hay Fluffers
3 items
ROTARY TEDDERS
HSManufa-ROTARY TEDDERS
The RTG2 Rotary Tedder from H&S features 5.600-6 Wheels, 12 flexible steel teeth, Cardan shaft with slip clutch, an oil bath gear boxrna working width of 10' 2", and a transport width = 8' 2". For more models, specifications, and pricing, view the PDF.
- USD
SWATH FLUFFERS
Kirchner-SWATH FLUFFERS
The KIRCHNER SWATH FLUFFER efficiently lifts and fluffs hay, grain, or other crops, allowing air to circulate underneath for faster drying or curing. This reduces the time between cutting, baling, and harvesting. With a 128-tooth reel turning at a slower RPM than the tires, the fluffer gently picks up, lifts, and releases the swath without causing damage to the crop. The fluffed swath can be shifted up to 18 inches to the left or right by angling the basket, placing it on drier ground for quicker drying. This adjustment can be made at speeds of up to 12 MPH for added efficiency. Reel speed is easily controlled via a flow control valve on the tractor. The 3-point operation allows the entire machine to be raised for transport or turning, while the pull hitch attachment enables operation with a drawbar tractor or towing with a truck. Originally designed to fluff rained-on swaths, KIRCHNER SWATH FLUFFERS have become essential in many haying and harvesting operations, offering faster and superior results. Additionally, chain-driven, ground-drive swath fluffers are available for operations with trucks or tractors lacking hydraulic systems, although they do not offer swath-shifting capabilities.
- USD
TEDDERS
Sitrex-TEDDERS
The ST 780H, 6 rotors, pull type, hydraulic lift tedder is the ideal machine to spread, air and turn all types of forage on all types of terrain. Obtains a perfect and even spreading of forage. All operator’s controls are hydraulically carried out from the tractor cab. Our tedder allows a working width of 26’ and 5” it is the answer to the growing demand of modern and efficient tedders suitable for faster work rate in large areas. The machine is equipped with wide-angle driveline that allows an angle of 80° to turn rapidly on sharp bends during reversing. During working the carrier for road transport is hydraulically raised over the machine. For road transport the carrier is lowered and at the same time the outer rotors are raised to reduce the overall width and keep the unit lifted from the ground of 4”. Furthermore, the stability of the machine during working is ensured by tandem axles with balloon tires fitted underneath the center rotors. Thus, the stress is evenly distributed and the tedder follows the undulations of the ground.
- USD
1 - 3 of 3
1