close
Filter By
Bale Wrapper
3 items
![Bale Wrapper](/userdocs/products/tubeline_bale_wrapper.png?width=300&format=webp)
Bale Wrapper
TL1000R
Hydraulically powered, the TL1700SR can easily switch between round and square bales by moving the secondary drive shaft on either of the appropriate stub shafts. Each stub shaft changes the drive ratio to provide the appropriate advancement of the bale. When the carrier arm is placed in the wrapping position, the carrier can be raised or lowered, centering the wrap on the bale to provide even plastic coverage throughout the wrapping process. The TL1700SR is also equipped with Tubeline's Twin Wrap Kit which laminates two layers together to form a stronger 2-ply layer of plastic. The Twin Wrap Kit is offset creating a 4" lead which ensures optimal overlap as the film is layered. For complete specifications and pricing on all of Tubeline's Bale Wrappers.
- USD
![BALE WRAPPER](/userdocs/products/lw1100-linewrap-field-productpage-scaled.jpg?width=300&format=webp)
BALE WRAPPER
HSManufa-BALE WRAPPER
The Automatic operating mode allows the H&S Linewrap to be a one man operation. The machine wraps while the operator loads. An optional remote control is available for side loading. The Linewrap’s independent power source is a 13 horse power gas engine with electric start. An 18 amp alternator powers the hydraulic system which controls all machine functions. The self contained hydraulic system utilizes a large capacity oil reservoir for cooler operation.
- USD
![Sitrex Bale Wrapper](/userdocs/products/wrapper-left.jpg?width=300&format=webp)
Sitrex Bale Wrapper
WR 3100
– Trailed version with side loading fork; – High performance in large areas; – Low ground pressure and high stability. Half-automatic centring; – Possibility to load bale till 900 kg without the use of ballast; – Direct discharge of the bale, without the use of the platform. “Optional” discharge vertical bale;
- USD
1 - 3 of 3
1